This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
The owner's manual was evetything I thought it would be. I was able to print it out using both sides of the paper in quick order, saving me a search online for a used one.
Was happy to find the complete owners manual... It's all in there, just like the original...
Text excerpt from page 22 (click to view)
Step 1: Charging your Sony CLI� Handheld
Charging with the cradle
Note Before you use your CLI� handheld for the first time, make sure to charge it.
Connect the supplied cradle to an AC power source in advance. Charging will start as soon as you place your CLI� handheld on the cradle. The battery icon in the screen changes to the battery charging icon ( ). It takes about 4 hours for your CLI� handheld to be fully charged for the first time. Subsequent charges, if it is charged frequently, will require less time.
Insert your CLI� handheld at an angle to the cradle and lay it back to fit into place.
To the wall outlet
When you place your CLI� handheld on the cradle, the cradle indicator turns on and charging starts.
When charging is completed
When you remove your CLI� handheld from the cradle, the battery charging icon changes to the battery icon ( ). The cradle indicator remains on even after charging is complete.
Notes � If the battery in your CLI� handheld is fully discharged, all data stored on the DRAM (memory) is lost. Performing another HotSync operation once the battery is recharged can restore information saved from the last HotSync operation. � Do not connect the headphones jack on your CLI� handheld with the LINE input connector while your CLI� handheld is being charged.
