Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Text excerpt from page 2 (click to view)
Installing the Tower onto the Floor Stand
STEP 1 � When using the tower as a surround speaker,
set Toggle Switch in tower cup to �Full Range.�When using as a front channel,set Toggle Switch in tower cup in bottom to the �Full Range�position.Please consult the Prelude MTS Subwoofer manual for exceptions to this setting.
STEP 3 � Insert double-ended Audio Banana Plug into tower
as shown.
STEP 2 � Screw alignment pins into cup in bottom of tower.
Use two per tower. Screw threaded ends into holes and tighten until snug.DO NOT overtighten.
STEP 4 � To add greater stability to the tower stand,add
sand (not included) in the plastic bag provided in the tower base. Turn the base upside-down and remove the (3) 1/4-20 Phillips screws holding the foot onto the base.
