This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 99 (click to view)
Setting the built-in mic gain
Setting the built-in mic gain
You can adjust the input sensitivity of the built-in mic as follows.
Turning the backlight on and off
You can set the display backlight of the PS-04 to on or off as follows. If the PS-04 is powered from batteries, setting the backlight to off will help extend the life of the batteries.
1.
With the recorder stopped, press the [SYSTEM] key.
The system menu appears.
2.
Use the cursor left/right keys to bring up the indication �INT MIC� on the display, and press the [ENTER] key.
1.
With the recorder stopped, press the [SYSTEM] key.
The system menu appears.
The display changes as follows.
Current sensitivity setting
2.
Use the cursor left/right keys to bring up the indication �LCD� on the display, and press the [ENTER] key.
3.
GAIN
L0
The display changes as follows.
Turn the dial to select one of the following settings.
LIGHT
3.
0N
Turn the dial to select either on or off.
� LO This is the on-mic setting, suitable for close-up vocal and acoustic guitar recording (default setting). � HI This is the off-mic setting, suitable for example to record an entire band in a studio.
The default setting is �on� (backlight activated).
4.
To return to the original screen, press the [EXIT] key repeatedly.
Each press of the [EXIT] key goes back by one screen.
4.
To return to the original screen, press the [EXIT] key repeatedly.
Each press of the [EXIT] key goes back by one screen.
HINT
The input sensitivity setting is saved for each project.
