First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
7.7 Removal of K-P.C.Board
TOP PREVIOUS NEXT 1. Remove the analysis block, LCD block and lens according to the steps 1 through 3 in the section 7.11. "Removal of Analysis Block and Lens". 2. Unscrew the screws (PT-LB10NTU/E: 1, Others: 3) and remove the grounding metal.
3. Unscrew the 2 screws and remove the lamp unit terminal. 4. Unscrew the 2 screws and remove the exhaust fan and speaker block. 5. Unscrew the 2 screws and remove the lamp house and thermofuse attachmemt fittings. 6. Unscrew the 2 screws and remove the K-P.C.Board.
