|
|
|
Who's Online
There currently are 5818 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Dear Sirs,
Thank you for the fast support, the manual does provide all necessary information to repair the radio. All schematics are in a good quality for reading.
The manual fits 100% to my requirements as a technican.
Kind regards Thomas
;
the big video recorder format s-vhs many features delicate in loading system of the cassette. Such machines are no longer manufactured, it would be too expensive.
 ;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
;
High quality scan of original Service Manual. Everything´s fine!
PV-GS29P / PV-GS36P / PV-GS39P / PV-GS59P / PV-GS29PC / PV-GS39PC / PV-GS59PC
9. Removal of Cassette Cover Unit 1) Remove the 3 Screws (519). 2) Disconnect the F.P.C. from Connector FP7001. 3) Pull off the Mechanism Ass'y & Main P.C.B.
519
Replacement of Mechanism Chassis Ass'y When replacing the Main Chassis Ass'y or the Cylinder Unit, be sure to perform the Envelope Output Adjustment. Refer to "ENVELOPE OUTPUT ADJUSTMENT" in MECHANICAL ADJUSTMENT. Mechanism Chassis Ass'y Handling Caution When servicing the Mechanism Chassis Ass'y without the Cassette Up Unit, do not handle the Sub Chassis of the Mechanism Chassis Ass'y.
Mechanism Chassis Ass'y (without Cassette Up Unit) Sub Chassis
Cassette Cover Unit
519
FP7001
519
Fig. D10 10. Installation of Main P.C.B. Take care not to damage the F.P.C.s. 1) Connect the F.P.C.s to the connectors on the Main P.C.B., verifying that the direction of the Flexible Cables is correct. Refer to "REMOVAL/INSTALLATION OF F.P.C. FROM NON ZIF (Zero Insertion Force) CONNECTOR." 2) Tighten the 2 Screws (545). 3) After installing the Main P.C.B, confirm the F.P.C.s are positioned as shown.
Sub Chassis
Main P.C.B.
545
Sub Chassis
<Side View> Fig. D11-2
545
Mechanism Chassis Ass'y
Capstan Sub Mechanism Cylinder Head F.P.C. F.P.C. F.P.C. Mechanism Amp F.P.C. F.P.C.
57
|
|
|
> |
|
