TOSHIBA RD-XS25SB V2
Owner's Manual

E2B11BD_EN.book Page 40 Thursday, September 21, 2006 11:41 AM

� If you want to monitor the programme that you are recording, make sure the device such as a Satellite Box is turned off when it is connected to AV2. � If you have not set the clock, you cannot switch to OTR. Set the clock in �Setting the clock� on page 28 before One-touch Timer Recording. � When the DVD disc space is full during the Onetouch Timer Recording, the Timer Recording stops and the unit turns off. � You cannot pause OTR.

Timer Recording
HDD DVD-RW
VR

DVD-RW

Video

DVD-R

You can programme the unit to record up to 32 programmes within a month in advance. Daily or weekly recordings are available. Preparing for Timer Recording: � Be sure to set the clock before programming a Timer Recording. Refer to �Setting the clock� on page 28. � Check that the recording media (internal HDD or DVD) has enough recordable space for the time you set. � Insert a recordable disc if you are recording to a DVD. � Use only the HDD or CPRM-compatible VR mode DVD-RW discs for recording copy-once programmes. (See page 34.)

1

Press [TIMER PROG.].
Timer Programme List will appear.
Timer Programme Station --10/04/06(Mon) 19:34

HDD Remain 72h00m(SP) 72:00(SP) Skip CH ----------------Date -- (---) -- (---) -- (---) -- (---) -- (---) -- (---) -- (---) -- (---) Start -- : --- : --- : --- : --- : --- : --- : --- : -End -- : --- : --- : --- : --- : --- : --- : --- : -Mode SP SP SP SP SP SP SP SP HDD HDD HDD HDD HDD HDD HDD HDD

Page 1/4 PDC -----------------

� You can access this screen from the Setup Menu also.

2

Select a line which is not yet set using [Cursor U / D], then press [ENTER].
Timer Programme Station --10/04/06(Mon) 19:34

1 2 3 4

HDD Remain 72h00m(SP) 72:00(SP) Skip CH P01 --------------Date -- (---) -- (---) -- (---) -- (---) -- (---) -- (---) -- (---) -- (---) Start ---- : --- : --- : --- : --- : --- : --- : -End ---- : --- : --- : --- : --- : --- : --- : -Mode SP SP SP SP SP SP SP SP HDD HDD HDD HDD HDD HDD HDD HDD

Page 1/4 PDC -----------------

5 6 7 8

1

2

Available recording time left on the recording media under the programmed Rec Mode. Recording Channel:
To record from an external input, select �AV1�, �AV2� or �AV3�. (Using camcorder or other source.)

40

EN