perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 13 (click to view)
Storage Drawer
The storage drawer can be removed. Before removing, make sure drawer is cool and empty.
To Replace:
1. Lift up the back of the drawer and place it inside the range in its fully forward position. 2. Lift up the front of the drawer to a level position. 3. Slowly push the drawer into the range until the drawer side rails engage with the gap in the drawer glides.
To Remove:
1. Pull the storage drawer straight back past the drawer stop notch and the end of the side rails.
A
A
B
A. Engage drawer glide
A. Drawer stop notch B. End of side rail
2. Lift up the back of the drawer and pull the drawer out.
4. Once the drawer is fully engaged on both sides, slide the drawer back into the closed position. NOTE: When removing and replacing the storage drawer, a slight push may be needed to move the drawer stop notch past the drawer glides.