I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Text excerpt from page 9 (click to view)
Adjusting the Oven Temperature
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But wher compared to your orb oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
LOCKING
1. Pull the
Oven Temperature Control Knob straight off.
I. Loosen the locking screws inside the control knob. Note the posltlon of the notches.
TOOTW
NOTCHES
NOTCHES
TOOTH
3. To lower the temperature, move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4. To raise the temperature, move the tooth a notch closer to HI. Eacl notch equals about 10°F(SC]. Tighten the locklng screws and replace the control knob.
