|
Who's Online
There currently are 5872 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is immaculate in it's accuracy. Everything is written very clearly and easy to understand. Written by a professional who wants to convey a clear and easy to understand message!!
;
This Manual (as downloaded) is both informative and comprehensive and has proved to be extremely useful. thoroughly recommended.
;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
USING YOUR RANGE
BAKING/ROASTING (CONT.)
6. When baking, put your food in the oven after the
preheat conditioning time ends. During baking/roasting, the elements will turn on and off to keep the oven temperature at the setting. NOTE: The top element helps heat during baking/roasting, but does not turn red.
7. After cooking, turn off the oven.
PRESS
OFF
CANCEL
YOU SEE
Saving energy
� To avoid loss of heat, open the oven door as little
as possible. � Use a timer to keep track of cooking time. � Plan your meals for the most efficient use of the oven by cooking more than one food at a time, or baking while the oven is still hot after cooking a meal.
(time of day)
ADJUSTING THE OVEN TEMPERATURE CONTROL
Although your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven. If you are not satisfied with the baking/roasting results, you can change the offset temperature by following the steps below. NOTE: DO NOT measure the oven temperature with a thermometer. Opening the oven door will lower the oven temperature and give you an incorrect reading. Also, the thermometer temperature reading will change as your oven cycles.
1. Press and hold BAKE for 5 seconds.
The display will show the current offset temperature, for example �0,� if you have not already adjusted the temperature.
PRESS
BAKE
YOU SEE
(factory setting of �0�)
16
|
|
|
> |
|