Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 32 (click to view)
l
Remove the broiler pan grid and any pots and pans being stored in the oven.
NOTE: You can clean the broiler pan (without grid) in the oven if you have first removed most of the soil by hand-cleaning or a dishwasher. If most of the soil is not removed, too much smoking will occur.The chrome broiler pan grid will discolor if cleaned in the Self-Cleaning cycle.
Personal Injury and Product Damage Hazard
l
Do not touch the oven during the SelfCleaning cycle. It could burn you. Do not use commercial oven cleaners in your oven. Cleaners could produce hazardous fumes or damage the porcelain finish. Do not leave foil in the oven during the Self-Cleaning cycle. Foil could burn or melt and damage the oven surface.
l
l
Wipe out This will help reduce smoke during the cleaning cycle.
any loose soil or grease.
l
. Remove the oven racks from the oven if you want them to remain shiny. You can
clean the oven racks in the Self-Cleaning cycle, but they will become harder to slide. (See page 39.) If you clean racks in the Self-Cleaning cycle, place them on the 2nd and 4th rack guides. (Guides are counted from bottom to top.)
l
NOTE: Do not force the Lock Lever. You
coukl bend or break it. The lever is designed to stay locked until the oven is cool enough to safely open. Wait until it moves freely. Do not block the vent during the SelfCleaning cycle. Air must move freely for best cleaning resufts. Do not leave plastic utensils near the vent. They may melt.
Heat and odors are normal during the Self
Cleaning cycle. Keep the kitchen well ventilated by opening a window or by turning on a vent hood or other kitchen vent during the cycle.
Setting
the controls
1. Make sure the clock is set to the correct
time of day. (See �Setting the clock� on page 12.1 2. Move the Lock Lever all the way to the right-the Clean position.
