Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Text excerpt from page 7 (click to view)
Scarico
Si può installare la curva del tubo di scarico in tre modi diversi: Sul bordo di un lavandino utilizzando il gomito in plastica fornito con la macchina. In questo caso, bisogna accertarsi che la curva non rischi di staccarsi dal bordo quando la macchina scarica. La si può fissare, ad esempio, con uno spago al rubinetto o al muro.
Collegamento elettrico
La macchina è prevista per funzionare a 220-230 V monofase, 50 Hz. Controllare che l�impianto domestico sia in grado di sopportare il carico massimo richiesto (2,25 kW), tenuto conto anche degli altri apparecchi in uso. Collegare la macchina ad una presa di corrente con messa a terra. Il costruttore declina qualsiasi responsabilltà per i danni o le lesioni causate dal non-rispetto della summenzionata norma di sicurezza. In caso di sostituzione del cavo di alimentazione rivolgersi al Centro di Assistenza Tecnica più vicino.
P0022
In una derivazione dello scarico del lavandino. Questa derivazione deve trovarsi sopra il sifone, in modo tale che la curva del tubo sia a 60 cm dal suolo, come minimo. In una conduttura di scarico situata ad un�altezza non inferiore a 60 cm e non superiore a 90 cm. L�estremità del tubo di scarico deve sempre essere ventilata, cioè il diametro interno del condotto di scarico deve essere più largo del diametro esterno del tubo di scarico. Il tubo di scarico non deve presentare strozzature. Farlo correre sul pavimento e farlo salire solo vicino allo scarico.
