perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 24 (click to view)
Using and Replacing the Light Bulbs
The Cooktop light
The Top Light Switch is located below the control panel. Push the right side of the switch to turn the light ON. Push the left side of the switch to turn it OFF.
To replace the fluorescent
tube and starter:
2. With both hands, pull top of light
cover towards you and lift it out of bottom support trim.
Remove the 3 screws and metal trim that supports the top of the light cover. The glass is heavy.
Hold it securely.
3. Grasp the fluorescent tube at both ends. Roll bottom of the tube towards the front until both ends come out of the receptacles. Replace with a 20-watt cool-white fluorescent tube. If starter needs replacement, push in and turn to remove and replace.
4. With both hands, carefully
fit the glass light cover into the bottom metal support trim. Replace the top support trim and screws. Turn electric power back on at the main power supply.
