This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 9 (click to view)
Adjusting
the Oven Temper&we
Control
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without you noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But when comparing to your old oven, the new design may give you different results. If after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
1. Pull the Oven Temperature Control
Knob straight off.
OFF
2. Loosen the locking screw Note
the position of the notches.
OFF
3. To lower the temperature,
move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4. To raise the temperature, Tighten replace the locking the control
move the tooth a notch closer to HI. Each notch equals about 10°F(5°C).
screw and knob.