The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
Text excerpt from page 12 (click to view)
Removing
Style 3
the meat drawer
and cover
Remove the meat drawer and cover for easier cleaning.
To remove the meat drawer: 1. Slide meat drawer out to the stop.
2. Lift the front of the meat drawer. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order.
To remove the cover: 1. Remove meat drawer.
2. Push cover back to release the rear of the cover from the shelf. 3. Tilt cover up at the front. 4. Pull cover forward and out.
To replace the cover: 1. Pit notches and rear edge of cover over
rear and center crossbars on the shelf. 2. Lower cover into place. 3. Replace the meat drawer.
Remove meat drawer before cover.
Styles
1 and 2
To remove the meat drawer: 1. Slide meat drawer out to the stop.
2. Lii front of meat drawer. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order.
To adjust the cover position: 1. Tilt front of cover up. 2. Lii back of cover.
3. Pull cover straight out.
To replace the cover: 1. Guide the cover�s rear hooks into
the slots in the shelf supports on the cabinet wall. 2. Tilt cover up at the front until the hooks drop into the slots. 3. Lower front of cover to a level position and replace meat drawer.
Pull out to the stop,
lift the front and pull again.
