|
|
|
Who's Online
There currently are 5882 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
Using the DSP Modes
4. Adjust the effect level. 1) Press BALANCE/SURROUND ADJUST repeatedly until �DSP EFFECT� appears on the display. 2) Turn MULTI JOG to select the effect level, while the indication of the previous step is still on the display. As you turn it, the effect level changes as follows: DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3 DSP EFFECT 5 DSP EFFECT 4 As the number increases, the selected DAP mode becomes stronger.
BALANCE/SURROUND ADJUST
MULTI JOG
Note:
Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.
To cancel the DAP mode Turn MULTI JOG until �DSP OFF� appears in step 2. The DSP indicator goes off from the display.
From the remote control:
1. Press SURROUND MODE repeatedly until the mode you want appears on the display. The DSP indicator also lights up on the display.
SURROUND MODE
Note:
The DAP mode is not used with the other DSP modes such as the 3D-PHONIC mode and the Surround mode. When the DAP mode is turned on, the other DSP mode, if used, will be turned off.
Each time you press the button, the DSP modes change as follows (the indicator of the selected DSP mode also lights up on the display):
PRO LOGIC OFF PAVILION 3D THEATER 3D DRAMA 3D ACTION HEADPHONE THEATER LIVE CLUB DANCE CLUB HALL
Note:
When you select �HEADPHONE,� you cannot go to the following steps. No adjustments can be made for �HEADPHONE.�
When the digital input is selected to play the source encoded with Dolby Digital: DOLBY DIGITAL DIG-THEATER OFF 3D DIGITAL HEADPHONE
If you need to make any adjustment, go to the following steps. 2. Press SOUND. 10 keys are activated for sound adjustments. 3. Adjust the speaker output levels as follows: � To adjust the left rear speaker level, press REAR�L +/�. � To adjust the right rear speaker level, press REAR�R +/�. 4. Press EFFECT to select the effect level. Each time you press the button, the effect level changes as follows: DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3
5
�
SOUND
REAR · L +
ENTER
6
8
� REAR · R +
9
Note:
You cannot adjust the rear speaker levels when �REAR SPK� is set to �NONE� (see page 19).
EFFECT
7/P
DSP EFFECT 5 DSP EFFECT 4 As the number increases, the selected DAP mode becomes stronger.
Note:
Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.
To cancel the DAP mode Press SURROUND MODE repeatedly until �OFF� appears. The DSP indicator goes off from the display.
33
|
|
|
> |
|
