|
|
|
Who's Online
There currently are 5502 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
 ;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
;
Exactly as described, the full user-manual (145 pages). Perfect.
6. The oven CLEAN LIGHT will glow when all steps are completed properly, except when set for a delayed start. The CLEAN LIGHT will come on when the cleaning process starts. The light goes off at the end of the time set on the clock. 7. The cleaning process begins immediately unless the self-cleaning process has been set for a delayed start. When the oven temperature reaches 550 °, the LOCK LIGHT will glow and the door cannot be opened until the temperature drops below 550°F. DO NOT TRY TO UNLOCK.THE DOOR WHILE LOCK LIGHT IS ON. The normal cleaning process takes the time selected on the clock plus about 45 minutes for the oven to cool down before the LOCK LIGHT goes out and the door can be opened. 8. After the LOCK LIGHT goes out, move the DOOR LOCK LEVER to the left. The oven door can now be opened. This step also stops the self-cleaning process. 9. Turn the SELECTOR and TEMPERATURE knobs from CLEAN to OFF after the door is unlocked. IMPORTANT: IFTHE TEMPERATURE KNOB IS TURNED TO OFF BEFORE THE DOOR IS UNLOCKED, THE DOOR WILL NOT OPEN. Forcing the lock will damage the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the door, then turn TEMPERATURE knob OFF.
NOTE: A fan comes on whenever the SELECTOR knob is set on CLEAN; therefore, the fan will continue to operate at the end of the cleaning process until the SELECTOR knob is turned OFF. The fan will also start as soon as the controls are set for a delayed start of the self-cleaning process.
To
stop
cleaning
process
before
lock
light
comes
on
1. Move the DOOR LOCK LEVER to the left. 2. Turn SELECTOR and TEMPERATURE knobs from CLEAN to OFF. 3. Turn STOP TIME dial until it pops out. Pointer should be at the same time of day as the oven clock.
To
stop
cleaning
process
after
lock
light
comes
on
1. Turn the STOP TIME dial until the knob pops out and the CLEAN light goes out. 2. Leave the TEMPERATURE and SELECTOR knobs in the CLEAN position. 3. Allow oven to cool until the LOCK LIGHT goes out. This may take up to 45 minutes, depending on how tong the oven has been on. 4. After LOCK LIGHT goes off, move the DOOR LOCK LEVER to the left. 5. Turn SELECTOR and TEMPERATURE knobs from CLEAN to OFF.
36
|
|
|
> |
|
