Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 14 (click to view)
Reversing the Door
4. Remove the door fitting on the lower right (1) and reposition the door bearing cover from the lower left to the right of the door (2), place the door fitting supplied in the lower left of the door (3). Carefully remove the door to the front and place on one side.
2
3
1
5. Move the upper bearing pivot to the left.
6. Carefully slide the door onto the top bearing pivot and close.
7. Place the lower door bearing with the bearing pivot in the lower left of the door and fasten.
8. Move the door handle from the left to the right and cover the remaining holes with the blanking plugs attached. 9. Open the door and fit the plinth cover. 14
818 17 80-00/1
