Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 27 (click to view)
US IN G T H E S EL F - C L EA NI NG CYCL E
To delay the start: 1. Press the Clean button and press and hold the Up or Down arrow button until the desired cleaning time shows on the display.
� Use 2 hours for light soil. � Use 3 hours to 4 hours maximum for moderate to heavy soil.
PRESS
CLEAN
PRESS YOU SEE AND HOLD
O N
CLN
TIME
CLEAN LOCKED
(example shows 3-hour cleaning time)
2. Immediately press the Stop Time button and press and hold the Up or Down arrow button to the new stop time.
The Self-Cleaning cycle will start at a time equal to the stop time minus the cleaning time. In the example at the right, that would be 5:30 minus three hours, or 2:30.
PRESS
STOP TIME
PRESS YOU SEE AND HOLD
DELAY
CLN STOP
TIME
DELAY CLEAN LOCKED
(example shows 5:30 stop time)
After the Self-Cleaning cycle is set:
The LOCKED Indicator Light will come on 15 seconds after you set the cleaning time. The door cannot be opened when this Indicator Light is on.
When the Self-Cleaning temperature is reached:
The Clean and Oven Indicator Lights will come on to tell you cleaning has begun. 27
