|
|
|
Who's Online
There currently are 5635 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
 ;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
;
I received the Manual in a timely manner and it was exactly what I needed.
This is a perfect copy of the Service Manual, The quality is great. I am very
happy. Thank you
;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
1
2
3
4
G
A
Step 4-3: Reset
IC401(Pin 83) XVCRST(DEC) IC401(Pins 161-164, P22-P29 155-158) N1
M1
Is the voltage "H"(3.3V)? Yes IC501(Pin 3)
B
No
Check the parts and patterns in the path(IC501 - IC401). No Replace IC501.
IsDATA? a there Yes
No
Check the parts and patterns in the path(IC401 - IC1301 and IC401-IC1384). No Replace IC401.
XVCRST(ENC)
M2
Is the voltage "H"(3.3V)? Yes No Check the parts and patterns in the path(IC501 - IC601). No Replace IC501. IC401(Pin 80) XTAL
IC401(Pins 21-28)
P12-19
N1
Is there a DATA? Yes No
*Only 480p/576p/720p/1080i input Check the parts and patterns in the path(IC401 - IC1301 and IC401 and IC1383). No Replace IC401.
M1
Is there a CLK (28.63636 MHz) ? Yes No Check the X401 or IC402. No Replace X401 or IC402.
R436,R435
P10, P11
N2
Is there a DATA? Yes R431,R430 P20, P21 No Check the parts and patterns in the path(IC601 - IC401). No Replace IC401.
C
Step 4-4: I2C
IC401(Pin 121) Does a signal output in constant period (0 - 3.3 V) ? Yes
D
VCSDA
M1
No Check the parts and patterns in the path(IC501 - IC401 and IC501-IC601). No Replace IC501 or IC401 or IC601. IC401(Pin 122) Does a clock output in constant period (0 - 3.3 V) ? Yes VCSCL Is there a DATA? Yes R401(IC601 Side) No
N3
Check the parts and patterns in the path(IC601 - IC401). No Replace IC401. LLC *Only 480i/576i input
N4
Check the parts and patterns in the path(IC501 - IC401 and IC501-IC601). No Is there a CLK? Yes Replace IC401. R429,R428(IC601 Side) P22-29 *Only 480i/576i input No Check the parts and patterns in the path(IC401 - IC601). No
M1
No
Replace IC501 or IC401 or IC601.
E
N5
Is there a DATA? Yes No Check the parts and patterns in the path(IC401 - IC601). No Replace IC401.
Step 4-5: VIDEO CLK,DATA
IC401(Pin 17) LLC
M1
Is there a CLK? Yes No Check the parts and patterns in the path(IC401 - IC1301 and IC401-IC1381). No Replace IC401.
F
H
46
1 2
SC-LX81
3 4
|
|
|
> |
|
