|
|
|
Who's Online
There currently are 5967 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
 ;
Good morning, the service manual you sent me was perfect.
Your service and answering are excellent.
I recomend this service.
Best regards.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
5. Adjustment
5-1. Camera Adjustment
5-1-1. Focus Adjustment
� Adjusting in the Photo Mode 1. Connect the camera and TV to video output cable. Turn on the power and set to the PC mode. 2. Aim the Main board at the focus chart placed 2.5 meters away and perpendicular to the center of the lens. 3. Loose a fixing screw lightly positioned in front of a lever in the state of pulling back macro lever toward °� (counterclockwise at the front). 4. Turn the focus adjusting lever until a lever is in focus through the TV screen (not to move the macro lever). 5. Tighten the fixing screw when the lever is in focus. * In the Photo mode, the state of the focus may be difficult to check. If it isn�t, you can adjust in Resume mode or with program for adjustment after taking a photograph. Fixing screw Focus Adjusting Lever
2.5 m
LENS
MAIN BOARD FOCUS CHART
(Focus Adjustment)
(Lens & Lever Position)
� Adjusting with Program for Adjustment * If the program for adjustment is used, the 3 times magnified screen allows you exactly to adjust camera. 1. Connect the camera to TV and PC with video output cable and PC connecting cable. Turn on the power and set to the PC mode. 2. Aim the Main board at the focus chart placed 2.5 meters away and perpendicular to the center of the lens. 3. After running the program for adjustment on the PC to click the Focus Mode On button in the Camera Adjustment mode. 4. Repeat step 3 through 5 of �Adjusting in the Photo Mode�. 5. Click the Focus Mode On button and finish the program for adjustment.
Samsung Electronics
5-1
|
|
|
> |
|
