|
|
|
Who's Online
There currently are 5772 guests and
2 members online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
;
This manual is immaculate in it's accuracy. Everything is written very clearly and easy to understand. Written by a professional who wants to convey a clear and easy to understand message!!
;
This Manual (as downloaded) is both informative and comprehensive and has proved to be extremely useful. thoroughly recommended.
;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
USING YOUR RANGE
TONES
Tones tell you if a function is entered correctly or not. They also tell you when a cycle is completed. To shut off all tones except the end-of-timer and error tones: Press and hold STOP TIME for 5 seconds. A short tone will sound to tell you the tones have been changed. Repeat to turn the tones back on. You will see �oFF� for 3 seconds when the tones are turned off and �on� for 3 seconds when they are turned on. To choose between high and low volume tones: Press and hold DELAY START TIME for 5 seconds. A short tone will sound to tell you the tones DELAY have been changed. Either �HI� or �LO� will START appear on the time display for 3 seconds to TIME show the volume you chose.
STOP TIME
BAKING/ROASTING
IMPORTANT:
1. Place the racks where you need them in
the oven. For more information, see
Front
� Never try to light the oven burner during a
power failure. bottom.
� Never place food on the oven door or oven
Your oven is designed with the ACCUBAKE® temperature management system to constantly monitor oven temperature. The burner element will cycle, as needed, to maintain the desired temperature. This feature is automatically activated when the oven is in operation.
�Positioning racks� under �Using the Oven�, earlier in this section.
Rear
2. Choose the bake setting.
PRESS
BAKE
YOU SEE
F
BAKE
3. Set the temperature (optional).
Do this step if you want to set a temperature other than 350°F. Press v to raise the temperature or w to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
PRESS
TEMP
YOU SEE
F
BAKE
(example for bake at 375°F)
4. When roasting, put your food in the oven. You
do not have to preheat the oven when roasting, unless your recipe recommends it. NOTE: The oven will cook normally even though the preheat conditioning timer is displayed. 14
Roasting meats and poultry
� For even cooking, place the meat on a rack in a
shallow pan. This keeps the meat out of the drippings and allows the heat to circulate better. � Use a meat thermometer for the most accurate doneness. Insert it so the tip is in the center of the largest muscle or thickest portion of the meat or poultry. Make sure the thermometer is not touching bone, fat, or the bottom of the pan.
|
|
|
> |
|
