WHIRLPOOL SF385PEGN4
Owner's Manual

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS
NOTE: Make sure the clock is set to the correct time of day. (See �Setting the clock� in the �Using Your Range� section.)

1. Press AUTO CLEAN.
This will automatically set a 3 �2-hour Self-Cleaning cycle. NOTE: There will be a 30-minute cool-down
1 1

PRESS
AUTO CLEAN

YOU SEE

CLEAN TIME

�2 hour before the cycle is over.

2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or shorter than 31�2 hours, use the hour and minute pads to set the cleaning time you want. Press the �up� (s) or �down� (t) pad(s) until a time between 21�2-41�2 hours shows on the display.

PRESS

YOU SEE

HR

MIN

CLEAN TIME

� Use 2 �2 hours for light soil. � Use 3 �2-4 �2 hours for average to heavy soil.
1 1

1

(example shows 41�2-hour cleaning time)

3. Start the oven.
The door will lock as soon as you press START/ENTER.

PRESS
START
ENTER

YOU SEE
ON
HEAT LOCK'D CLEAN TIME

5 SEC

4. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures: LOCK�D goes off and the door unlocks.

YOU SEE

CLEAN

5. After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or sponge. If needed, touch up spots with a mildly abrasive cleanser or cleaning sponge.

continued on next page

21