Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Text excerpt from page 20 (click to view)
Changing the Cooktop Light
The lop light switch is located on the left side of the front control panel.
cooktop and disconnect the electrical plug to the backguard. Lower the cooktop. 2. Grasp each side of the backguard and lift it straight up.
1. Lift up the
1. Turn backguard over. Remove the four screws holding the back cover panel, then remove the cover. 4. Roll bottom of fluorescent tube away from you until both ends can be removed from the receptacles. Replace with a 20-watt cool-white fluorescent tube. 5. Replace the back cover panel and screws. 6. Replace the backguard. Reconnect the electrical plug under the cooktop. 7. Turn power back on at the main power supply.
Changing the Oven Light
The oven light will only come on when you push the Oven Light switch on the control panel. Push it again to turn off the light.
cIRcurl BREAKER
es
la!!
2. Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb. Turn the power back on at the main power supply.
