I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
Very well done!!!!! congratulations. It was a bit longer than usual the wiating time even if it was on time (in 24 hours).
Text excerpt from page 20 (click to view)
Changing the Cooktop Light
The lop light switch is located on the left side of the front control panel.
cooktop and disconnect the electrical plug to the backguard. Lower the cooktop. 2. Grasp each side of the backguard and lift it straight up.
1. Lift up the
1. Turn backguard over. Remove the four screws holding the back cover panel, then remove the cover. 4. Roll bottom of fluorescent tube away from you until both ends can be removed from the receptacles. Replace with a 20-watt cool-white fluorescent tube. 5. Replace the back cover panel and screws. 6. Replace the backguard. Reconnect the electrical plug under the cooktop. 7. Turn power back on at the main power supply.
Changing the Oven Light
The oven light will only come on when you push the Oven Light switch on the control panel. Push it again to turn off the light.
cIRcurl BREAKER
es
la!!
2. Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb. Turn the power back on at the main power supply.