|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
B Connect two units using the SB-62 cable as shown by the item 3. DATA COMMUNICATIONS (page 9) in this manual.
C Press 2 button on any unit (A). This unit�s LCD display ROM TEST ROM OK RAM TEST XXX K OK KEY TEST XXX 2 ECHO D Then press 1 button on another unit (B). Another unit�s LCD display ROM TEST ROM OK RAM TEST XXX K OK KEY TEST XXX 1 COMM 2 ECHO OK
In the case of NG, LCD displays a letter �FAIL�. If �OK� was displayed, another unit (B) transmitted data to any unit (A). E Pressing ESC buttons on the both units, return to the condition described in the item 12 . LCD displays on the both units are the same as display shown in the item 11 . F Next, try to transmit data from the unit (A) to the unit (B). G Return to the condition described in the item B using ESC button. H Pressing ON/OFF button twice, turn these units off.
� 16 �
|
|
|
> |
|
