Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
Text excerpt from page 21 (click to view)
English
Figure 11/Ilus. 11
AHAM DW-1 10 Place Setting
C. Loading the Lower Rack Depending on the model dishwasher you have, the lower rack may have features and accessories that will add to its loading versatility. These features and accesories include fold-down flip tines and various silverware baskets. Check with the Model Features Chart on page 6 in this manual to find out which features and accessories your dishwasher has. Place large bowls, pots, and pans upsidedown in the lower rack. If your dishwasher has lower rack flip tines, fold them down to accommodate large utensils such as serving spoons and large knives. Figure 11 shows the load pattern for 10 place settings, and Figure 12 shows the load pattern for 12 place settings. D. Accomodating Extra Tall Items If an item to be loaded into the lower rack interferes with the upper spray arm or is blocked by the upper rack, simply remove the upper rack and install the Extra Tall Item Sprinkler. Remove the Upper Rack The same procedure is used for removing the Standard and RackMatic upper racks. 1. Pull the empty upper rack out of the dishwasher to the point that it can be lifted upward. 2. Pull the rack outward and up until the rollers are completely free of the roller guides. 3. Slide the roller guides back into the dishwasher tub. Install the Sprinkler 1. Insert the Sprinkler into the upper rack spray outlet at the back of the dishwasher tub as shown in Figure 13, and turn the Sprinkler clockwise. 2. Place your extra tall item(s) in the lower rack as in Figure 14. 3. Select a wash cyle and start the dishwasher. Note: When the cycle is complete, remove the Sprinkler by turning it counter-clockwise until it comes loose from the upper rack spray outlet. Do this before you reinstall the upper rack. Otherwise, your dishwasher could be damaged. Reinstall the Upper Rack 1. Tilt the upper rack upwards and position the upper rack rollers onto the roller guides. 2. Continue pushing the upper rack until the rollers are on the guide. 3. Push the upper rack into the dish washer tub.