PANASONIC SLCT700
Owner's Manual

Caution
�Batteries
�Do not peel off the covering on batteries and do not use if the covering has been peeled off. �Align the poles + and - correctly when inserting the batteries. �Do not mix different types of batteries or old and new batteries. �Remove the batteries if you do not intend to use the unit for a long time. �Do not throw into fire, short-circuit, disassemble, or subject to excessive heat. �Do not attempt to recharge dry cell batteries. �When carrying batteries in a pocket or bag, ensure no metal objects such as necklaces are placed together with them. Contact with metal may cause short-circuiting which can cause a fire. For safety, carry the rechargeable batteries in the battery carrying case. A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY for information on how to recycle this battery.
RBRC
TM

Specifications
Audio (CD-DA)
No. of channels: 2 (left and right, stereo) Frequency response: 20 to 20,000 Hz (i0.5 dB to j10 dB) DA converter: 1 bit, MASH Headphone output level: RMS max. 8 mWi8 mW/ 16 � (adjustable) Play time: [Approximate operating time in hours (playing MP3 at the recommended bitrate of 128 kbps, with HOLD on and EQ canceled, at 25 eC (77 eF) on a flat, stable surface)]
Batteries used 2 optional alkaline batteries 2 supplied rechargeable batteries 2 supplied rechargeable and 2 alkaline batteries MP3 disc 65 15 CD-DA disc 30 10

Pickup
Light source: Wavelength: Semiconductor laser 780 nm

Ni-Cd

MP3
Supported bit-rates: 32 kbps to 320 kbps (128 kbps is recommended) Supported sampling frequency: 48 kHz/44.1 kHz/32 kHz Maximum number of items (sum of albums and tracks): 999 Maximum album levels: 100

�CDs
�Do not use irregularly shaped CDs. �Do not use non-specification discs. �Do not use CDs printed with label printers available on the market. �Do not use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers.

80

42

Recharging time:

2 to 3 hours

�The play time may be less depending �Play time will be considerably
reduced when playing CD-RW. Operational temperature range: 0 eC�40 eC (32 eF�104 eF) Rechargeable temperature range: 5 eC�40 eC (41 eF�104 eF) Dimensions (WaHaD): 134.4a16.9a133.8 mm (59�32za21�32za59�32z) Mass: 204 g (7.2 oz.) (with batteries) 157 g (5.5 oz.) (without batteries) on the operating conditions.

�Listening

General

EST. 1924

Power supply: DC input (via included AC adaptor): DC 4.5 V AC adaptor input: AC 120 V, 60 Hz Power consumption: Using AC adaptor (MP3/CD-DA): Recharging: 2.6 W/2.6 W 5.0 W 2.2W

Do not play your headphones or earphones at a high volume. Hearing experts advise against continuous extended play. If you experience a ringing in your ears, reduce volume or discontinue use. Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headphones or earphones are the open-air type designed to let you hear outside sounds, don�t turn up the volume so high that you can�t hear what�s around you. Sound can be deceiving. Over time your hearing �comfort level� adapts to higher volumes of sound. So what sounds �normal� can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: �Start your volume control at a low setting. �Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: �Leave it there.

Power consumption in standby mode:

Note:
Specifications are subject to change without notice. Mass and dimensions are approximate.

�Allergies
Discontinue use if you experience discomfort with the earphones or any other parts that directly contact your skin. Continued use may cause rashes or other allergic reactions.

IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference.

Safety
1. Power source�Connect the unit to a power source of the type described in these instructions or as marked on the unit. 2. Polarization�The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature ensures that the plug fits into your household AC outlet only one way. If the plug doesn�t fit one way, try reversing it. If the plug still doesn�t fit, contact an electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the plug. 3. Power cord protection�Route the AC power supply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and disconnecting it. 4. Overloading�When connecting the AC power supply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or electric shock. 5. Nonuse periods�Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms. Leaving the unit connected to a household AC outlet for extended periods can cause battery fluid leakage. 6. Attachments and accessories�Use only the attachments and accessories recommended in these operating instructions.

Maintenance
Unplug the unit from the household AC outlet before cleaning. Clean with a damp cloth. Do not use abrasive pads, scouring powders, or solvents.

Service
1. 1. 1. 1. 1. 1. 2. Damage requiring service�The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. Servicing�Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts�When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check�After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Installation
�Placement
1. Foreign material�Ensure objects and liquids do not get into the unit. Avoid exposing the unit to excessive smoke, dust, mechanical vibration, and shock. 2. Magnetism�Situate the unit away from equipment and devices that generate strong magnetic fields. 3. Stacking�Do not place anything on top of this unit. 4. Wall and ceiling mounting�Do not mount the unit on walls or ceilings unless specified in the instructions.

�Environment
1. Water and moisture�Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements. 2. Heat�Situate the unit away from heat sources, such as radiators. Do not leave it in an automobile exposed to direct sunlight with the doors and windows closed as this may deform the cabinet. 2. Do not situate where temperatures fall below 5 eC (41 eF) or rise above 35 eC (95 eF).

2