SONY SLVKS1
Service Manual

Connections
Follow the steps below to connect your TV to the VCR.
VCR

Your TV
AUDIO
(MONO)

VIDEO

LINE IN LINE OUT

AUDIO R L

VIDEO

2 3
AUDIO OUT to an AC outlet

1
VIDEO OUT

2
AUDIO IN R

1
VIDEO IN AUDIO IN L

Step 1
Using the supplied audio/video cable, connect one of the yellow plugs to VIDEO of LINE OUT on this VCR, and the other yellow plug to VIDEO of LINE IN on your TV.

Step 2
Connect both of the red and white plugs, in any order, to the black AUDIO LINE OUT jacks on this VCR, and the other ends to the AUDIO LINE IN jacks on your TV. If your TV is monaural (only one AUDIO LINE IN jack), you only need to use one of the red or white plugs. Just be sure to connect the same color plug to both the VCR and your TV.

Step 3
Plug in the power cord to an AC outlet.
Note
� If your TV only has an RF jack (antenna jack), you need to use an RF modulator (not supplied) to connect this VCR. Refer to your modulator�s instruction manual for further details.

Using the LINE IN jacks
When you want to use this VCR to make a recording, connect

AUDIO

(MONO)

VIDEO

LINE IN on this VCR to LINE OUT of your other video source LINE IN (such as a video camera, TV, or another video deck) using an audio/video cable (not supplied). If your other video source AUDIO IN VIDEO IN has a stereo LINE OUT (three jacks), use the audio/video cable VMC-910MS (sold separately). Play the original tape on the other video source and use this VCR to make the recording. See � Recording and Tape Speed Buttons� on the reverse for more information.
Note
� If you connect your TV�s LINE OUT jacks to the LINE IN jacks, be sure to disconnect the VCR�s LINE OUT jacks from your TV�s LINE IN jacks.

1-2 E 1-2