SONY SLVLX66S
Service Manual

SLV-LX55/LX66S/LX77S

5. Alignment and Adjustment
5-1 Reference
1) X-Point (Tracking center) adjustment and �Head switching adjustment� can be adjusted with remote control. 2) When replacing the Micom (IC601) and NVRAM (IC603 ; EEPROM) be sure to adjust the �Head switching adjustment�. 3) When replacing the cylinder ass�y, be sure to adjust the �X-Point� and �Head switching adjustment�. 4) How to adjustment. - Monmently short-circuit the test point on Main PCB with pincers to set the adjustment mode. - If the corresponding adjustment button is pressed, the adjustment is performed automatically. - If the adjustment is completed, be sure to turn the power off.

5-1-1 Location of adjustment button of remote control

1

2 5 8 0

3 6 9

X-Point (Tracking Center) Adjustment

4 7

Head Switching Adjustment

Fig. 5-1

5-1