Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Excellent quality, very quick download turnaround, will definately use again.
Text excerpt from page 15 (click to view)
Stereo and Tuned Level Adjustment Setting:
FM RF SSG
Stereo Separation Adjustment Setting:
FM RF SSG level meter
set
set
FM ANTENNA (75�) Modulation : Stereo Standard signal Output level : 18µV (25dB) (at 75 � open)
FM ANTENNA (75�) Modulation : Stereo Standard signal Output level : 6mV (76dB) (at 75 � open)
LINE OUT
Procedure: 1. Tune the set to 98 MHz. 2. Adjust RV203 to the point (moment) when the �STEREO� and �TUNED� indicators will change from going off to going on. FM Signal Level Adjustment Setting:
FM RF SSG
Procedure: FM stereo Signal generator Output channel L-CH R-CH R-CH L-CH Level meter connection L-CH L-CH R-CH R-CH Level meter reading (dB) A B Adjust RV301 for minimum reading on Level meter C D Adjust RV301 for minimum reading on Level meter
set
FM ANTENNA (75�) Modulation : Stereo Standard signal Output level : 3mV (76dB) (at 75 � open)
L-CH Stereo separation : A � B R-CH Stereo separation : C � D The separations of both channels should be equal.
Procedure: 1. Tune the set to 98 MHz. 2. Press [DISPLAY] button to display the digital signal, then adjust RV202 to be display as �Signal 70dB�.
