|
|
|
Who's Online
There currently are 5747 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
STR-DA1ES/DB780 SECTION 4 TEST MODE
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting. Procedure: 1. While pressing the [DIMMER] and [SET UP] buttons, press the I/1 button to turn on the main power. 2. The message �FACTORY� appears and the present contents are reset to the default values.
SOFTWARE VERSION MODE
When this mode is used, the destination and the software version number are displayed. Procedure: 1. While pressing the [ENTER] and [AUTO DEC.] buttons, press the I/1 button to turn on the main power. 2. The destination and the software version number appear.
TUNER AM STEP CHANGE (9 kHz/10 kHz) MODE (Except STR-DB780: AEP and UK models)
Either the 9 kHz step or 10 kHz step can be selected for the AM channel step. Procedure: 1. While pressing the [PRESET TUNING +] or [TUNING +] button, press the I/1 button to turn on the main power. 2. Either the message �9 k STEP� or �10 k STEP� appears. Select the desired step.
KEY CHECK MODE
When this mode is used, the destination and the software version number are displayed. Procedure: 1. While pressing the [FM/AM] and [CINEMA STUDIO EX C] buttons, press the I/1 button to turn on the main power. 2. The message �REST 30� appears. 3. Every pressing of any button other than the I/1 button counts down the buttons. The buttons which are already counted once are not counted again. 4. When all buttons are pressed, the message �REST 00� appears.
TUNER AUTOBETICAL TUNING MODE (STR-DB780: AEP and UK models)
Procedure: 1. While pressing the [MEMORY] button, press the I/1 button to turn on the main power. 2. The message �AUTO-BETICAL SELECT� appears and scans and stores all the FM and FM RDS stations in the broadcast area. 3. When done, the message �FINISH� appears.
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [MODE +] button, press the I/1 button to turn on the main power. 2. The message �SF. CLR.� appears and initialization is performed.
ALL CLEAR MODE
All preset contents are cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [AUTO DEC.] and [MODE +] buttons, press the I/1 button or press the I/1 button for more than five seconds to turn on the main power. 2. The message �MEMORY CLEARED !� appears and the memories are reset to the default values.
FLUORESCENT INDICATOR TUBE PATTERN CHECK MODE
All fluorescent segments are tested. When this test is activated, all segments turn on at the same time, then each segment turns on one after another. Procedure: 1. While pressing the [DISPLAY] and [ENTER] buttons, press the I/1 button to turn on the main power. 2. All segments and all LEDs turn on. 3. Turn the [FUNCTION] dial. 4. Half of segments and [Digital Cinema Sound], [AUTO DEC.], [MODE] LEDs turn on. 5. Turn the [FUNCTION] dial once again. 6. Others half of segments and [2CH ST], [INPUT MODE], [MULTI CH DIRECT] LEDs turn on. 7. Turn the [FUNCTION] dial once again. 8. All segments and all LEDs turn off.
11
|
|
|
> |
|
