PHILIPS TCD168/CHAEAAAR
Owner's Manual

BEFORE
Insert the micro-SIM card First, place the micro-SIM card into the appropriate slot in the battery compartment (the clipped corner should be at the top left). Then, slide the card with your finger until it stops. Insert the battery 1. Keep the battery + and - on the top facing the + and - of the phone. 2. Slide the battery onto the contacts points and press. Replace the battery cover Hook the battery cover onto the hinges on bottom of phone and press forward until the latch catches. Charge the battery With the battery inserted in the phone, plug the connector into the right socket at the base of the phone. Next, plug the transformer unit into an AC power socket. The only way to turn off the charger is to unplug it, so use an easily accessible AC power socket. The battery icon on your phone�s display indicates the state of the charge process: � Bars moving = battery is charging. � Bars steady = battery is fully charged. � Battery outline flashing (see Troubleshooting p. 32). You can switch the phone on and use it during charging.

Y O U S TA R T

The first time you charge the battery and later, if it is completely discharged, the battery icon will only appear 2 to 3 minutes after you connect the charger. Please charge the phone for a minimum of 3 hours before first use. 3