This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 8 (click to view)
Use
The control panel
TIMED PROGRAMME
COOLING DRY FRESH
COTTON
EXTRA DRY READY TO WEAR STORE DRY SLIGHTLY DAMP IRON DRY WRING DRY
9h 6h 3h
DRYING COOLING END
30' 60' 90'
QUICK
NO BUZZER
LOW TEMP.
DELAY START
START/ PAUSE
CLOGGED FILTERS FULL TANK CLOGGED CONDENSER
BABY DRY IRON DRY
EXTRA DRY
TCE 7145
SYNTHETIC
STORE DRY
123456
1 QUICK button
By depressing this button the drying time is reduced in the following COTTON programmes: � EXTRA DRY � READY TO WEAR � STORE DRY The corresponding light illuminates. This option cannot be selected together with the LOW TEMPERATURE function.
7
4 DELAY START button
This button allows you to delay the starting of the programme by 9, 6 or 3 hours. Press the button until the light relevant to the desired delay lights up. This option must be selected after having selected the programme and before pressing START/PAUSE to start the programme. The machine begins the countdown, which is shown by the pilot lights. For example, if you have chosen a 9-hour delay (pilot light 9h lit), after 3 hours, 9h goes out and 6h lights up; after 3 more hours, 6h goes out and 3h lights up. When the 9 hours are over (pilot light 3h off), the drying cycle begins. During the delayed start period, it is not possible to change the programme or the selected delay. If you wish to do so, you must first cancel everything by rotating the programme selector dial to position �O�. Select the new programme, the options and the delayed start, then press START/PAUSE. If you wish to change only the options, this can be done on condition that the new option(s) is(are) compatible with the programme. Set the machine to PAUSE by depressing the relevant button, select the new option(s) and depress START/PAUSE button again. If you wish to add some laundry while the machine is performing the countdown, after having done so and having closed the door, press START/PAUSE again, in order to allow the machine to complete the remaining countdown time.
2 NO BUZZER button
A buzzer sounds � when selecting the programme � when depressing the buttons � when an incorrect option selection is made � when the programme selector dial is turned to another position during the programme or when you depress an option button during the cycle � at the end of the programme and during the anticrease phase � when the water reservoir is full � if the machine is not working correctly � when the door of the appliance or the small door at the bottom are open By depressing NO BUZZER button the acoustic signal is switched off in the same cases mentioned above. The corresponding light comes on.
3 LOW TEMPERATURE button
Pressing this button allows drying to be performed at a lower temperature, for delicate items. The corresponding pilot light comes on. This option can also be used for time controlled drying. This function cannot be used with QUICK. 8
5 START/PAUSE button
Press this button to start the dryer after having selected the programme and the options. The relevant light will stop flashing. If you have chosen a delayed start, the machine will begin the countdown.
