perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 15 (click to view)
MD synchronized recording
Synchronized recording makes it possible to start cassette recording in synchronism with the playback of the MD recorder. Be sure to make the Compu Link connection among the EX series components.
1 Load the tape for use in recording.
Press 0 to open the tape tray, place a tape on it and press 0 to close it. � It is not possible to record onto a cassette tape with the broken accidental erasure tab. Use a cassette the tab of which is not broken. � If you want to record music on both sides of tape continuously, switch the reverse mode on (see page 13). � If you want to use Dolby Noise Reduction, press DOLBY NR to select B or C (see page 13).
2 Prepare the MD recorder.
Load the MD to be played. Program MD tracks if required. * Refer to the instruction manual of the MD recorder for the MD recorder operating procedures.
3 Press REC PAUSE.
REC PAUSE CD REC
The cassette deck enters record-pause mode.
4 Press �/8 of the MD recorder.
Synchronized recording starts.
/CANCEL
To stop recording:
Press &/CANCEL of the MD recorder to stop recording. The cassette deck will stop after leaving a non-recorded blank of 4 seconds. If you want to stop recording immediately, press 7 of the cassette deck.
