|
|
|
Who's Online
There currently are 6024 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
TH-37PR9U / TH-42PR9U
8. Disconnect the coupler(DA5). 9. Remove the Flexible Cable from the couplers(DA2). 10. Remove the 4 screws and then remove the DA-Board Block.
18. Remove the 7 screws ( ) and then remove theSC-Board and the clamper. 19. Remove the 2 screws ( ) and then remove the Plate.
11. Disconnect the couplers(P2, P9, P11, P12, P23, P25). 12. Remove the 6 screws ( ) and then remove the P-Board. 13. Remove the 5 screws ( ) and then remove the AC-Inlet Block and the clamper.
20. Disconnect the couplers(SS23, SS34). 21. Remove the Flexible Cable from the couplers(SS41, SS42, SS43, SS44). 22. Remove the 6 screws ( ) and then remove the SS-Board. 23. Remove the 1 screw ( ) and then remove the Ferrite Core.
14. Disconnect the coupler(D20). 15. Remove the Flexible Cable from the couplers(D31, D32). 16. Remove the 4 screws and then remove the D-Board. 24. Remove the 8 screws ( ) and then remove the Flexible Cable from the couplers(CB1, CB2, CB3, CB4, C12). 25. Remove the 4 screws ( ) and then remove the C1-Board.
17. Remove the SU-Board and the SD-Board. (Reference to Removal of the SU-Board and the SD-Board) 25
|
|
|
> |
|
