Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
I want to give you a real heads-up for your desire to enable such people as I to acquire the information I need to maintain the older types of equipment such as this Akai HXA351W. You do a swell job with all the processes you have to perform so I can have a legible, thus usable
document which does not send me crazy trying to figure out the blurry text of a bad copy.
Very well done, Thomas.
Text excerpt from page 12 (click to view)
TH-42PX600U
4. Disconnect the coupler (DT07) 5. Remove the screws (�2 ). 6. Remove the DT-Board metal cover and DT-Board.
6.11. Remove the H-Board
1. Unlock the cable clampers to free the cable. 2. Disconnect the couplers (H2, H40 and H51). 3. Disconnect the flexible cable (H1).
6.10. Remove the DG-Board
1. Remove the DT-Board. (See section 6.9.) 2. Remove the screws (�8 metal frame. ) and remove the DT-Board
4. Remove the screws (�6
) and remove the H-Board.
3. Disconnect the coupler (DG2). 4. Disconnect the flexible cables (DG1, DG15 and DG20). 5. Remove the screw (�1 ) remove the DG-Board.
