I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 24 (click to view)
Picture Adjustments
1
PICTURE
Press the PICTURE button on the Remote Control to display the Picture menu.
2
Select to adjust each item. Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Picture Normalise Picture Mode Contrast Brightness Colour Tint Sharpness White balance
Normal
Press the left modes.
Normal 20 0 0 0 0 Normal
or right
Normal
button to switch between
Dynamic Cinema
Normal For viewing in standard (evening lighting) environments. This menu selects the normal levels of Brightness and Contrast. Dynamic For viewing in brighter environments. This menu selects higher than normal levels of Brightness and Contrast. Cinema Ideal for movies. � Can be selected for AV/Component. Note: If you would like to change the picture and colour of the selected Picture menu to something else, adjust using the items in the Picture menu. (see next page)
Press the left or right modes. Normal
button to switch between
Cool Warm
Helpful Hint (
N
/
Normalise
Normalisation)
While the �Picture� menu is displayed, if either the N button on the remote control is pressed at any time or the (Action button) is pressed during �Normalise�, then all adjustment values are returned to the factory settings.
