I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Easy to order the manual. Good quality and fast delivery.
Text excerpt from page 24 (click to view)
TK-690H(B)
DISASSEMBLY FOR REPAIR
6. Disassembly of the Display Unit (X54-3190) : KCH-10
1. Pull out the VOL and UP/DOWN knobs ( 1 ). 2. Remove the 2 hexagnal nuts ( 2 ). 3. Disconnect the 2 connectors (CN2 and CN4) of the display unit (X54-3190 A/3). You can remove the UP/ DOWN encoder ( 3 ). 4. Remove the waterproof seal ( 4 ). 5. Remove the 4 screws ( 5 ) holding the speaker and PC board fitting. 6. Remove the 3 screws ( 6 ). You can remove the display units (X54-3190 A/3 and C/3) ( 7 and 8 ). 7. Remove the 3 screws ( 9 ), and remove the sub-panel ( 10 ) and keytop ( 11 ).
7. Disassembly of the Display Unit (X54-3200) : KCH-11
Pull out the VOL and UP/DOWN knobs ( 1 ). Remove the 2 hexagnal nuts ( 2 ). Remove the waterproof seal ( 3 ). Disconnect the connector (CN4) of the display unit (X543200 A/2), and remove the 5 screws ( 4 ). you can remove the up/down encoder ( 5 ) and display unit. 5. Remove the 4 screws ( 6 ), and remove the sub-panel ( 7 ) and keytop ( 8 ). 1. 2. 3. 4.
