|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I will definitely be back for more information when I need it.
;
The service manual when downloaded and printed out was clear and easy to read. I would have liked to have been able to enlarge some details, but this was not possible as the file permissions did not allow this. The service was very good. The time taken from placing my order to downloading the document was only a few minutes.
 ;
The manual is useful for trouble shooting for an old instrument. It saved money,and let me enjoy DIY.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
TKR-751
INSTALLATION
Note :
Relationship between TEST/SPKR connector (15-pin) connection and speaker output. When pins 9 and 12 are shorted : Built-in internal speaker is used. When pins 9 and 12 are open and output is from pins 6 and 12 : KES-4 or KES-5 is used.
4. Accessory Cabinet
You can install optional accessories, such as a DC power supply or duplexers in the accessory cabinet. 1. Place the optional accessory in the cabinet as shown below. 2. If necessary, attach cushions (G13-1801-04 and/or G131802-04) to the top plate (J21-8402-04) in order to adjust the space between the cabinet and the top plate. Then, insert the 3 tabs of the plate into the slots in the side of the cabinet. High, middle, or low positions are available. To afix the plate, inset and tighten 2 screws on the other side of the plate. You can also flip the top plate upside-down to adjust a height of the cabinet space.
Tighten screws Cushion (G13-1801-04 or G13-1802-04) Hardware fixture Insert the plate tabs to set the height position (high, middle, or low).
Fig. 4-1
or
Fig. 4-2
The top plate can be inverted to adjust the height of the cabinet space.
Fig. 5
Fig. 4-3
7
|
|
|
> |
|
