|
There are currently no product reviews.
 ;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
;
This is the correct service manual of SHARP RX-100H(BK) DAT.
(4) Select [Front] button first, and select R,G or B button. (When you adjust the R level, then select RVCOM)
(8) Change the internal signal patern. Set the white level 50% and press [OK] button.
(9) Select [Front] button, and select [NRSH] button.
(5) Push [+1] or [-1] button, change data and look for the point with which a flicker serves as the minimum. If you push [+4] or [-4] button, the data moves fast. (6) Nxt, select [Ceiling] button, and select R,G or B button.
(10) Push [+1] or [-1] button, change data and look for the point with which a vertical stripe serves as the minimum. If you push [+4] or [-4] button, the data moves fast. (11) After adjusting, push [Save] button .
(7) After adjusting, push [Save] button .
1-36
|
