First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Welcome. The scheme is clearly helped me to repair. Worth to download it.
Text excerpt from page 6 (click to view)
WIRING-2 (LED C.B)
1 2 3 4 5 6
ELECTRICAL ADJUSTMENT A MAIN C.B
A
B
J103 EARPHONE
VR202
C
VR201 PLAYBACK SPEED
D
1
R/P HEAD
2
E
1. Azimuth Adjustment Settings: F � Test tape: TTA-330 � Test point: EARPHONE JACK (J103) � Adjustment location: Azimuth adjustment screw � PAUSE: OFF Method: G 2. Tape Speed Adjustment (4.8 cm/s) Settings: � Test tape: TTA-100 (TAPE CENTER) � Test point: EARPHONE JACK (J103) � Adjustment location: VR202 H � PAUSE: OFF � VOLUME: Maximum � PLAYBACK SPEED: Normal (Speed volume center) Method: I Play back the test tape, and adjust for 3000 Hz ±10Hz � VOLUME: Maximum. Play back the test tape, and adjust so that the output (8 kHz) becomes maximum.
