The document was usefull, and it was exactly what I was looking for.
Text excerpt from page 6 (click to view)
(3)
Eliminate twisting, etc. of the high-voltage cable and arrange it so that no twisting occurs. (See Figure 3-3) Caution : If the cable is not arranged correctly, the anode cap could turn and cause an installation defect.
High-voltage cable
Anode cap
Figure 3-3
(4)
Turn over the rubber cap symmetrically on the left and right. (See Figure 3-4) Caution : Take great care not to damage the anode cap.
Figure 3-4
(5)
Fit your forefinger over the projection at the center of the cap and hold the cap between your thumb and middle finger. (See Figure 3-5)
