JVC UX-H100AT
Owner's Manual

Recording Discs �Disc Synchronized Recording
You can start disc play and recording at the same time.

You cannot press � (recording) in the following cases: � If no cassette is inserted. � If a protected cassette is inserted.

On the unit ONLY:

To stop recording for a moment, press *. The recording is paused, but the CD playback does not stop. To resume recording, press * again. To stop recording, press &/). The recording stops and the CD playback is paused.
CD

1 Put a recordable cassette in with the exposed
part of the tape down.
� See also page 15.

2 Close the cassette holder gently. 3 Press CD 3/8 to select the CD
player as the source.
#/8

To remove the cassette, press &/) while recording is stopped.

4 Press 7 to stop the disc playback.

7

� If you want to start recording from a particular track, select the beginning track using UP ¢ or DOWN 4, then go to the next step. � If you want to make a program, perform steps 2 to 4 on page 13. After making a program, go to the next step.

5 Press � (recording).
The REC indicator appears on the display and the CD starts playback automatically and the recording starts.
REC

� When the end of the tape is reached, recording stops and the CD player is paused. � If you press � (recording) while playing back the CD, the CD player returns to the beginning of that track and the track is recorded on the tape.

18

English