JVC UXH30 / EU
Service Manual

UX-H30

2.2.4 Removing the flywheel (See Fig.8, 9) � Prior to performing the following procedure, remove the head amplifier & mechanism control board and the main motor assembly. (1) From the front side of the cassette mechanism, remove the slit washers attaching the capstan shaft L and R. Pull out the flywheels backward.

Fly wheel R
Fig.8

Fly wheel L

Fly wheel R

Fly wheel L

Capstan shaft R

Capstan shaft L

Slit washer
Fig.9 2.2.5 Removing the reel pulse board and solenoid (See Fig.10) � Prior to performing the following procedure, remove the head amplifier & mechanism control board. (1) Remove the screw C. (2) Release the tab a, b, c, d and e retaining the reel pulse board. (3) Release the tab f and g attaching the solenoid on the reel pulse board. (4) The reel pulse board and the solenoid come off.

a
Solenoid

b

c

d

Reel pulse board

f

g C

e

Fig.10

1-16 (No.22033)