Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Text excerpt from page 33 (click to view)
For the locations of remote control buttons, refer to page 27.
Adjusting Playback Level (DVD LEVEL)
The audio of a DVD VIDEO and DVD AUDIO may be recorded at a lower level (volume) than for other types of disc. You can adjust the DVD level.
Enjoying Better Pictures (PROGRESSIVE)
In the progressive mode, you can enjoy better pictures.
CAUTION
â� While a disc is being played back
Press
.
, the display
� Each time you press
toggles as follows in the display window.
: Sound level recorded in the DVD. : Enhances the sound level (initial setting). : Enhances the sound level to the highest level.
� In order to enjoy pictures in the progressive mode, the following requirements should be met. � There must be component video input terminals on the TV set connected to the main unit. � The main unit and the TV set must be connected using a component video cord ( page 15). When the above requirements are not satisfied, leave the main unit in the Interlace mode. If the progressive mode is set, pictures may be distorted.
â� While the disc is played back or paused
Hold down
.
, the display
� Select the level while listening to the sound played back.
NOTE
� Each time you press toggles as follows.
Interlace mode (initial setting)
� DVD level is effective only for playback of a DVD. � Even if the DVD level is changed, the output level from the digital audio output terminal will not be changed. � This function does not affect recording sound. Progressive mode