|
|
|
Who's Online
There currently are 5496 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great Manual. This manual is available no where else. It was exactly what I was looking for.
;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
RECORDING
on day and at same time o Press � or � buttons, until the W(Week) value is ------:--�--:---I.SELECT to select the AV1,AV2 displayed. followed by the required day. or AUX input sources. ------:--�--:---CURSOR �� ¥�
------:--�--:----
4
the � or � button.
------:--�--:---Example : W SA (Weekly Saturday) ------:--�--:----
Press � to select the recording day.
DELETE:CLR/RST MENU Extend recording time o Press ¥ or � buttons, until STOP selection flashes. Select the required day by pressing
5
time. Press � to select the recording start time.
o Press � � buttons to increase or decrease the stop
6
OK
SP/LP PROG. AUDIO TV/VIDEO
Select o Press the ¥ or � buttons, recording speed selection flashes. Select required hour value by pressing the � or � button. displayed : SAT.MONI.
A.DUB SAT.CONT. PICTURE
7
o Press � or � buttons until the correct indication is
8 Press � to select the minutes. 10
� SP (Standard Play) Press � to select the recording end time. � LP (Long Play)
9 Select required minute value by pressing the � or � button.
� AUTO (Auto Tape Speed Select) : see page 37
Select VPS/PDC o Press ¥ or � buttons, until the V/P selection flashes. recording start time. Note : Do not select VPS/PDC unless you are sure Press � or � button to switch between the AUTO, SP
button, following same procedure as when selecting the
Select required recording end time by pressing the � or � 11 Press � to select the recording speed (AUTO/SP/LP). is displayed. 12
o Press � � buttons until the ON or �-� indication
13
VPS/PDC ON (by selecting �ON� in the right -
Note: Auto Tape Speed Select The VTR�s Auto Tape Speed Select function
hand column on the screen), then you must set up actual recording time remaining on the tape start time EXACTLY according published Press � � button to toggle between the VPS or PDC mode loaded. If there is insufficient tape to complete a TV schedule. Otherwise the timer recording won�t ON ) and the non-VPS/PDC mode (marked -). timer recording in AUTO mode, the VTR take place.
programme you wish to record is broadcast with (standard Play), LP (Long Play) recording speeds.
Press � select VPS or PDC (V/P) mode. compares duration of the timer recording to 14
15
To set another timer programme, press � button go to next 16
automatically switches LP mode to record the line and follow steps 2 to 15.
whole programme. E.g. If there is a one hour Timer recording in When you have finished, press the MENU button. 17 AUTO mode to be started, and only 40 minutes Press two TIMER button to activate the timer. Note : If you wish to turn the timer off any reason simply press minutes and switch to complete remaining 40 the two TIMER button again. minutes in LP mode. Result : Before starting recording, VTR compares the timer
tape remaining, the VTR will record in SP for 20
18
duration with remaining time on the cassette.
36 37
RECORDING
�� ¥�
SP
Toshiba
The TIMER Programming feature allows you preset the VTR record a up to one month before that programme
66
RECORDING
System Recording Using the TIMER Programming Feature (V753UK/V653UK/V253UK only) continued
Using the TIMER Programming Feature
Press � or � button to select the STANDARD option and then press the � button or, Insert cassette. Press the PROG button. 1
If wish to correct programme displayed or modify certain elements, such as the recording speed, you can do so before is broadcast. Up to six programmes can be preset. you press MENU a second time to confirm.
Modifying VIDEO Programming
If you wish to... Then... Press Menu on the remote control.
DISPLAY Result : The programming menu is displayed.
Select an input source other o ¥ or � buttons, until PR selection flashes. Press the OK button to select TIMER PROGRAMMING option. than tuner (AV1, AV2 AUX ) o Press I.SELECT button one or more times to change the input Result : The TIMER PROGRAMMING menu is displayed. source selection. Result The programme number is replaced by : � A1, A2 AU for a satellite tuner or external video input (used by another VTR for example) Note : The input source must be selected before changing any other value. COUNT.RST
OK END: MENU
VIDEOPLUS TIMER METHOD **
PROG OPTIONS INSTALL STANDARD
CLOCK BONUS LANG
TIMER PROGRAMMING
Record a programme every day o Press ¥ or � buttons, until the DAY selection flashes. F.ADV CLR/RST �� � END: MENU (Monday to Sunday) at same time o Press � or � buttons, until the DLY (Daily) value is displayed. Press � to select the input source.
2
pressing the � � button or WE 1 12:00�12:50 ON
Record PR DAY START�STOP V/P a programme every week o Press ¥ or � buttons, until the DAY selection flashes.
3
PROG
1/JAN WED 21:28 Select the required station by
Reference Information
2-17
|
|
|
> |
|
