PANASONIC VB44030
Owner's Manual

Section 700 - Operation

Chapter 7. SLT Features

Considerations
� N/A

Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient of the call. CO, Extension, and Network calls may be parked. There are two ways for an extension to park a call on the DBS 576HD. One way is to park the call at the receiving extension and to retrieve the parked call at another extension by dialing the park answer code plus the parking extension number. The other way is to park the call at another extension and dial the park transfer answer code at the other extension to retrieve the call. Beginning with Version 3.6, an Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-appearing calls), a Hold Recall, and a Station Park Recall. Operation To park a call on this extension: Action
1. While on a call, press the HOLD key. 2. Enter the Call Park Hold access code (default = 771). 3. If necessary, page the party that needs to retrieve the call.

Result
� Current call on hold

To retrieve a call parked at the originating extension from another extension: Action
1. Lift the handset or press the ON/OFF key. 2. Enter the Call Park Answer/Other Ext. access code (default = 773). OR... Enter the Call Park/Floating Hold Answer feature access code (default = *9). 3. Dial the number of the extension that parked the call. � Connected to parked call

Result
Intercom dial tone

To park a call at another extension: Action
1. Press the HOLD key. 2. Enter the Call Park Transfer access code (default = 774). 3. Dial the extension number to receive the parked call. 4. If necessary, page the party that needs to retrieve the call. �

Result
� Current call on hold

576-50-700

DBS 576HD (USA) issued September 2001

6-19