Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Text excerpt from page 35 (click to view)
Using Your 900 MHz Cordless Telephone
SWITCHING CALLS BETWEEN TELEPHONES
The 900 MHz cordless telephone base station allows you to switch calls between the 900 MHz handset and the key telephone. Caution: Do not press the buttons labeled "Desk" or "Cordless" on the base station when receiving a call. Doing so may disconnect the call.
Switching a call from 900 MHz handset to key telephone
To switch during an active call: 1. Press HOLD on the 900 MHz handset. 2. Press TALK on the 900 MHz handset. 3. Press the DESK button on the base station. 4. Pick up the receiver on the key telephone.
Note: � When the base station is operating with the key telephone, and you press the 900 MHz handset TALK button, there is no handset tone. The handset displays LINE IN USE for 5 seconds. If the PBX is powered off and on while the base station is in use, it may be necessary to reset the base station. You can do so by powering the base station off and on.
