PIONEER VSX-LX60/HDLPWXJ
Owner's Manual

The System Setup menu

07

125 250

Acoustic Calibration EQ Adjust
4k TRM

Acoustic Calibration Equalization is a kind of room equalizer for your speakers (excluding the subwoofer). It works by measuring the acoustic characteristics of your room and neutralizing the ambient characteristics that can color the original source material (providing a �flat� equalization setting). If you�re not satisfied with the adjustment provided in Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 8 or Automatic MCACC (Expert) on page 37, you can also adjust these settings manually to get a frequency balance that suits your tastes.1

Tip � Changing the frequency curve of one channel too drastically will affect the overall balance. If the speaker balance seems uneven, you can raise or lower channel levels using test tones with the TRIM feature. Use / to select TRIM then use / to raise or lower the channel level for the current speaker.

4 When you�re finished, press RETURN. You will return to the Manual MCACC setup menu.

1 Select �EQ Adjust� from the Manual MCACC setup menu.
DVD /LD 3. M anu al MC AC C a. b. c. d. e. - 55. 0dB

Acoustic Calibration EQ Professional
This setup minimizes the unwanted effects of room reverberation by allowing you to calibrate your system based on the direct sound coming from the speakers. It can also provide you with a graphical output of the frequency response of your room.2

F in e C h ann el Lev el F in e SP D ist an ce Stan din g Wav e EQ Ad just EQ Pro fessio na l

:R e turn

How to use Acoustic Calibration EQ Professional
If you find that lower frequencies seem overly reverberant in your listening room (i.e. it sounds �boomy�), or that different channels seem to exhibit different reverb characteristics, select EQ Pro. & S-Wave (or ALL) for the Custom Menu setting in Automatic MCACC (Expert) on page 37 to calibrate the room automatically. This should provide a balanced calibration that suits the characteristics of your listening room. If you still aren't satisfied with the results, the manual Advanced EQ setup (below) provides a more customized calibration of your system using the direct sound of the speakers. This is done with the help of a graphical output that can be displayed on-screen, or using a computer (with software available from Pioneer � see Connecting a PC for Advanced MCACC output on page 61).

2 Confirm that the MCACC preset shown in the display is the one you want to adjust, then select START.
DVD /L D - 55. 0 dB 3d. EQ Adjust MCACC:M1. MEMORY 1

[ START ]

ENTER:Next

:Cancel

3 Select the channel(s) you want and adjust to your liking.
DV D / L D 3d. EQ Adjust M C AC C : M 1 Ch [SBL] dB - 5 5 . 0 dB 63Hz [ 125Hz [ 250Hz [ 500Hz [ 1kHz 2kHz [ 4kHz [ 8kHz [ 16kHz [ TRIM [ 0.0] 0.0] 0.0] 0.0] 0.0 -1.0] -2.0] -4.5] -7.0] 0.0]

How to interpret the graphical output
The graph shows decibels on the vertical axis and time (in milliseconds) on the horizontal axis. A straight line indicates a flat-response room (no reverb), whereas a sloping line indicates the presence of reverberation when outputting test tones. The sloping line will eventually flatten out when the reverberant sound stabilizes (this usually takes about 100 ms or so).

63

500 1k 2k

:Finish

Use the

/

buttons to select the channel.

Use the / buttons to select the frequency and / to boost or cut the EQ. When you�re finished, go back to the top of the screen and use the / buttons to select the next channel. � The OVER! indicator shows in the display if the frequency adjustment is too drastic and might distort. If this happens, bring the level down until OVER! disappears from the display.

Note
1 When EQ Adjust is selected for a MCACC preset memory where EQ is set to OFF in the Audio parameter, EQ ON is automatically selected. 2 This system allows you to customize your system calibration with the help of a graphical output that can be displayed on-screen, or using a computer (with software available from Pioneer�see Connecting a PC for Advanced MCACC output on page 61 for more on this).

8k 16k

43
En