Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
Text excerpt from page 5 (click to view)
[ 1.3 ] B Board Removal
Remove the cover and front panel as indicated in [1-1] and [1-2]. Disconnect CN600 power cord and remove from unit. Remove the 1 Philips screw from the rear panel. Remove the 3 Philips screws from the circuit booard. The B board can then be lifted clear of the chassis.
==> ==> ==>
CN600
Screws
Screw Screw
==>
[ 1.4 ] Chassis Removal
To remove, lift the front of the chassis slightly to clear the stops and slide forward out of the bottom cover.
